Time to Re-think Downlights

Time to Re-think Downlights

“What more do I need to know about downlights?”, you might ask. We all use them on a regular basis – what more is there to learn? Increasingly we have transferred our love of halogen to LED as the availability of conventional light sources has faded away. In this transfer to LED, must we change the way we use downlights in room design?

Four things that top interior designers do with LED downlights:

Use fewer downlights

    – in reality they are an over-used tool. There is a temptation to flood a space with light. Lighting down from a ceiling is very effective and a ceiling has lots of space for fittings – so it is easy to achieve. However I do advocate (that as often as possible) you must try to light something physical with a downlight rather than just space!

  1. Nobu-downlight-gridAvoid the ubiquitous row or grid of ceiling spots that are so tempting sometimes to position and install. Position a light fitting where we need the light. That may mean we have lights in the ceiling that are not neatly lined up – but that needn’t be a concern as the eye will see the light before it sees the fitting. In some instances the client may demand symmetry in the ceiling and they wish to avoid a peppering of holes. Solve this by choosing fittings that double or triple the down light source within a ceiling fitting and ensure they are adjustable.
    They effectively throw light into the space in various directions
  2. recessed_square_image_twin_03from a single point. Select a recessed fitting that sinks into the ceiling and is as unobtrusive as possible. This type of fixture often has a black recess but we have stocks of fittings available with white to lose them in a white ceiling.
  3. Use a downlight with beam width options. The results are worth the effort – variety is the spice of life and this can apply to our lighting. A short cut to remember is to specify a wider beamed light for the fittings around the perimeter of a room, so the light will wash down the wall a little and push those walls back – and tighten the pools of light inside the room so that the lighting is defined and not simply washed everywhere
  4. main-photoMake the transition from low voltage halogen to LED with care. Be mindful of the transition between the light sources and be aware of the comparative lumens levels (strength of light) between the old and the new technologies. Mains halogen = approx 450 lumens
    LV halogen = approx 900 lumens
    Gauge your choice of LED within these boundaries for the desired result between task and ambient.
    You will not need a large number of LED downlights to replace an existing halogen scheme. LED lamps are not achieving the LV equivalent in terms of power, but you should ask the question – “…do you really require a 900+ lumens level punch from a light?”.

Leave a Reply

Your email address will not be published. Required fields are marked *